Sinanju WIP

Ever wanted to paint your thrusters a different color on the inside? Here's how.



What you will need:
This stuff goes by a few different names blue/sticky/mounting tack. It's a sticky rubber like substance usually used to hold up posters and the like.

Step 1:
Paint your thrusters base color. This will be the color they are on the INSIDE.


Step 2:
Ball up some blue tack and fill the insides, be careful to keep the tack off the thruster "lip" 


Step 3:
Spray your outside color.


Done:
You now have two color thrusters.


For flat verniers masking tape is the way to go.

Use a hobby knife to cut the tape down to size.


That's all for today, next up will be reverse washing the insignia parts!

Comments

Post a Comment

Popular posts from this blog

A Gundam builder's guide to IPMS

Image
I've been building models for over 10 years now and competing for close to 5. In that time I've learned some hard, painful lessons but I've also made some of the best friends of my life. Competing in model building is a very unique and rewarding experience and I hope to better equip you for what is to come! I want to take a moment to say thank you to those of you support me on  Patreon ! If you're not subscribed yet, go check it out and consider signing up for as little as 1$ per month. I raffle off some of my completed works once per year and take tutorial requests from all patrons! It seems to me that the dudes who spend their time gluing bits of plastic together to make model robots should have a lot in common with the dudes who glue bits of plastic together to make model planes and tanks. But walk around the sci-fi sectiont at an IPMS show and you’ll almost certainly hear someone complaining that “these IPMS guys just don’t know what they’re doing whe
Read more

From the Backlog: You got Katoki'd

Image
This kit has been looming in the background of my WiP's for almost a year. Katoki's redesign of The Okawara classic Wing Gundam. Not sure what sense that makes but hey it's Bandai so it doesn't really need to. I've wanted to do a Wing series kit for a while now mostly because it was my gateway into the world of Gundam. Every afternoon at 4:30 my eyes were glued to the tv screen in want of glorious mecha combat. Despite having a poor narrative and a ridiculous amount of recycled stock animation 8 year old me was in love. So, what's the verdict on this kit? Not great unfortunately. The frame is decent enough if a bit skinny but the redesigned rifle does nothing for me. The proportions are strange too making it look more like a giant power ranger than a combat mech. The backpack in particular irks me. The way the wings are connected make moving them a major pain as well as giving them a very limited range of motion. It also begs the question, how d
Read more

Extreme Squad Lupus

Image
My painted build of the Extreme Squad Lupus conversion for FM barbatos. This was an excellent quality kit. The molding is crisp and details are beautifully rendered in soft, sandable resin. It was de-nubbed easily and with minimal dust by method of wet sanding under running water. I prepared the surface by sanding with 400, then 800, then 1000 grit sanding sponge. Then primed with Mr. Surfacer 1000. There were a few spots that should have been fixed with putty but I missed them at the time. A lesson for next time. Several parts had difficulty retaining paint, chipping down to bare resin after masking several times. (Side skirts, sheathes, and shoulders.) I eventually got paint to stick to these parts using a very thin putty as a tack coat. List of paints used: Gold 1 (light): Gaianotes EX Gold Gold 2: Tamiya TS-23 of which I decanted 40 ml then added 5 drops of clear yellow lacquer (Gaia) Grey 1: NAZCA mechanical surfacer Grey 2: NAZCA super heavy surfacer Metal 1 (grey): Trucolor grap
Read more